$1.18As low as $0.178Enter your quantity to see your price
Advantages:
Looking for a CAD Drawing? Download Here
Yardley Standardized Pressed-In Inserts are spiral knurled, open or closed-ended inserts for driving or pressing into soft materials such as plastics, foamed plastics and rubber. Ideal for use where minimal pull-out strength is needed, but some torque resistance is required. Can also be molded-in and feature patented I.D. design for use with locating pins.
Please request a quote for discounts on orders over 25,000.
| From | To | Discount Price |
|---|---|---|
| 1 | 499 | $1.18 |
| 500 | 999 | $0.400 |
| 1,000 | 1,999 | $0.334 |
| 2,000 | 4,999 | $0.302 |
| 5,000 | 9,999 | $0.224 |
| 10,000 | 24,999 | $0.178 |
| Thread Type | |
|---|---|
| Material | |
| U.S. Thread Size (A) | |
| Outside Diameter (B) | |
| Outside Diameter Reference (B) | |
| Length (C) | |
| Length Tolerance (C) | |
| U.S. I.D. (+.0015 -.0000 after tapping) (D) | |
| Starting Hole Size (E) | |
| Base Materials | |
| Installation Methods |
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
